Nebula | Nebula Professional Pack | |
---|---|---|
Number of administrator accounts | 5 | No limits |
Number of cloud authentication entries | 100 | No limits |
Number of Nebula device (AP, switch or gateway) photos | 1 | 5 |
Statistics or monitoring information | Up to 7 days | Up to 365 days |
Email summary reports | No | Yes |
Email alerts | No | Yes |
In-app push notifications | No | Yes |
Organization change logs | No | Yes |
Support tickets | No (Forum and regional support still available) | Yes |
Viewing the site-wide network topology | No | Yes |
Viewing the organization VPN topology | No | Yes |
Viewing IPTV report and channel information | No | Yes |
Adding clients for a managed AP or gateway | No | Yes |
Cloning site settings when creating a site | No | Yes |
Specifying login IP address ranges for an organization | No | Yes |
Exporting data to a CSV or XML file | No | Yes |
Creating firmware upgrade schedules on a per-device basis | No | Yes |
Enabling RADIUS accounting with captive portal for an SSID profile | No | Yes |
Setting NAS ID for web authentication (captive portal) via RADIUS | No | Yes |
Sending gateway traffic log to a syslog server | No | Yes |
Configuring IGMP snooping, IGMP filtering profiles and IGMP-related port settings | No | Yes |
Configuration management including site settings synchronizing, switch settings cloning and configuration backup/restoration | No | Yes |
Specifying destination IPs, port numbers, protocol type and priority for bandwidth limits in traffic shaping | No | Yes |
Setting which alerts to be created and sending notifications within the Nebula mobile app | No | Yes |
Creating configuration templates and binding sites | No | Yes |
Setting a signal strength threshold for smart steering on a per-AP basis | No | Yes |
Enabling web authentication with Facebook Wi-Fi | No | Yes |
Viewing wireless health report | No | Yes |
Label | Description |
---|---|
Search | Specify your desired filter criteria to filter the list of organizations. |
matches in | This shows the number of organizations that match your filter criteria after you perform a search. |
organizations | This shows the number of organizations that you can manage. |
Status | This shows whether all the Nebula devices registered to a site in the organization are online (green) or have been off-line for at least six days (gray), or some of them have recently generated alerts (amber) or go off-line (red). The color is white when there is no Nebula device in the organization. |
Organization | This shows the descriptive name of the organization. |
Type | This shows your NCC version type. |
NCC License Status | This shows whether the license is valid (ok), the license has expired and the organization downgraded from Nebula Professional Pack to Nebula (expired), or this is a Nebula free organization and NCC license is not required (N/A). |
NCC License expiration (UTC) | This shows the date when the license will expire, or N/A when there is no Nebula device in the organization or this is a Nebula free organization and NCC license is not required. |
Sites | This shows the number of sites belonging to this organization. |
Devices | This shows the number of Nebula devices in this organization which are online (green), have generated alerts (amber), go off-line (red) or have been off-line for at least six days (gray). |
NAP | This shows the number of Nebula APs connecting to the sites in this organization. |
NSW | This shows the number of Nebula switches connecting to the sites in this organization. |
NSG | This shows the number of Nebula security gateways connecting to the sites in this organization. |
Label | Description |
---|---|
From organization | Select the organization from which the license credit will be transfered. |
Nebula Points | This shows the number of the selected organization’s current device points for the NCC service. |
Nebula Security Points | This shows the number of the selected organization’s current device points for the NSS-SP service. |
License Type | Select the type of the license and specify the number of points to transfer. |
Add | Click this button to create a new entry for another license type. |
Remove | Click this button to delete the entry for the type of license and points that you no longer want to transfer. |
To organization | Select the organization to which the license credit will be transfered. |
Reset | Click this button to return the screen to its last-saved settings. |
OK | Click this button to save your changes. |
Level 1 | level2/level3 | Function |
---|---|---|
SITE-WIDE | Use these menus to view information on all Nebula managed devices that are deployed in the selected site. | |
Monitor | ||
Dashboard | Use this menu to view device connection status and traffic summary. | |
Summary Report | Use this menu to view network statistics for a site, such as bandwidth usage, power usage, top devices, top clients and/or top SSIDs. | |
Map & Floor Plan | Use this menu to locate devices on the world map and even on a floor plan. | |
Topology | Use this menu to view the site’s network topology. | |
Configure | ||
General Setting | Use this menu to change the general settings for the site, such as the site name, device login password and firmware upgrade schedule. | |
Alert Setting | Use this menu to set which alerts are created and emailed or sent by the Zyxel Nebula Mobile app. You can also set the email address(es) to which an alert is sent. | |
Add Device | Use this menu to register a device and add it to the site. | |
Firmware Management | Use this menu to schedule firmware upgrades. | |
Cloud Authentication | Use this menu to add user accounts and grant user access to the selected site via different authentication methods, such as the MAC-based authentication, captive portal or the IEEE 802.1x authentication method. | |
AP | Use these menus to monitor and configure the managed AP(s) by the NCC. The settings are applied when a Nebula AP is registered and attached to the selected site. | |
Monitor | ||
Access Point | Use this menu to view the list of APs added to the site. | |
Client | Use this menu to view WiFi clients which are connecting to the APs in the site. | |
Event Log | Use this menu to view all events on the AP. An event is a log of something that has happened to a managed device. | |
Wireless Health | Use this menu to view health of the wireless networks for the supported APs and connected clients. | |
Summary Report | Use this menu to view network statistics specific to APs in the site. | |
Configure | ||
SSIDs | Use this menu to enable and configure basic settings for SSID profiles. | |
SSID Schedule | Use this menu to set whether the SSID is enabled or disabled on each day of the week. | |
Authentication | Use this menu to configure WiFi security, L2 isolation, intra-BSS and walled garden settings for SSID profiles. | |
Captive Portal | Use this menu to configure captive portal settings for SSID profiles. | |
Radio Setting | Use this menu to configure global radio settings for all APs in the site. | |
Client Steering | Use this menu to configure load balancing settings and enable smart clients steering for all APs in the site. | |
Port Setting | Use this menu to enable or disable a port on the managed AP and configure the port’s VLAN settings. | |
SWITCH | Use these menus to monitor and configure the managed switch(es) by the NCC. The settings are applied when a Nebula switch is registered and attached to the selected site. | |
Monitor | ||
Switch | Use this menu to view the list of switches added to the site. | |
Client | Use this menu to view detailed information about the clients which are connecting to the switches in the site. | |
Event Log | Use this menu to view all events on the switch. An event is a log of something that has happened to a managed device. | |
IPTV Report | Use this menu to view available IPTV channels and client information. | |
Summary Report | Use this menu to view network statistics specific to switches in the site. | |
Configure | ||
Switch Ports | Use this menu to view the switch port statistics and configure switch settings for the ports. | |
IP filtering | Use this menu to configure the access control list in order to control access to the switches. | |
Advanced IGMP | Use this menu to enable and configure IGMP snooping and create IGMP filtering profiles. | |
RADIUS Policy | Use this menu to configure port authentication. | |
PoE Schedule | Use this menu to set the schedule for switches in distributing power to powered devices. | |
Switch Configuration | Use this menu to configure global switch settings, such as (R)STP, QoS, port mirroring, authentication servers, voice VLAN and DHCP white list. | |
GATEWAY | Use these menus to monitor and configure the managed security gateway(s) by the NCC. The settings are applied when a Nebula gateway is registered and attached to the selected site. | |
Monitor | ||
Security Gateway | Use this menu to view the detailed information about a security gateway in the selected site. | |
Client | Use this menu to view the connection status and detailed information about a client in the selected site. | |
Event Log | Use this menu to view all events on the gateway. An event is a log of something that has happened to a managed device. | |
VPN Connection | Use this menu to view status of the site-to-site VPN connections. | |
NSS Analysis Report | Use this menu to view the statistics report for NSS (Nebula Security Service). | |
Summary Report | Use this menu to view network statistics specific to the gateway in the site. | |
Configure | ||
Interfaces Addressing | Use this menu to configure network mode, port grouping, interface address, static route and DDNS settings on the gateway. | |
Firewall | Use this menu to configure firewall rules for outbound traffic, application patrol, schedule profiles and port forwarding rules for inbound traffic. | |
Policy Route | Use this menu to view and configure policy routes. | |
Content Filtering | Use this menu to enable content filtering and block access to specific web sites. | |
Site-to-Site VPN | Use this menu to configure VPN rules. | |
L2TP over IPSec Client | Use this menu to enable and configure L2TP VPN settings. | |
Network Access Method | Use this menu to enable or disable web authentication on an interface. | |
Walled Garden | Use this menu to configure walled garden web site links, | |
Captive Portal | Use this menu to configure captive portal settings for each gateway interface. | |
Traffic Shaping | Use this menu to configure the maximum bandwidth and load balancing. | |
Security Filtering | Use this menu to enable or disable Intrusion Detection and Prevention (IDP) on the security gateway. | |
Network Servers | Use this menu to configure the DNS server and address records and also set the external AD (Active Directory) server or RADIUS server that the security gateway can use in authenticating users. | |
ORGANIZATION | Monitor | |
Overview | Use this menu to view a list of sites belonging to the selected organization and detailed information about the devices connected to the sites. | |
Change Log | Use this menu to view log messages about configuration changes in this organization. | |
Configure | ||
Create Site | Use this menu to create a new site. | |
Inventory | Use this menu to view the summary of devices which have been registered and assigned to the sites in the selected organization. | |
License Management | Use this menu to view and manage your licenses. | |
Setting | Use this menu to configure the security settings or delete the organization. | |
Administrator | Use this menu to view, remove or create a new administrator account for this organization. | |
Cloud Authentication | Use this menu to create or remove user accounts and grant user access to all sites in the selected organization via different authentication methods, such as the MAC-based authentication, captive portal or the IEEE 802.1x authentication method. | |
VPN Members | Use this menu to view and manage the VPN members in the organization. | |
Configuration Management | Use this menu to synchronize the configuration between sites or switch ports and back up or restore a configuration file. | |
Configuration Template | Use this menu to create or delete a configuration template or bind a site to the template. | |
HELP | Support Forum | Use this menu to go to Zyxel Nebula Forum, where you can get the latest Nebula information and have conversations with other people by posting your messages. |
Support Request | Use this menu to view or submit a new eITS ticket. | |
Online Documentation | Use this menu to view the documentation for the NCC and Nebula devices. | |
Firewall Info | Use this menu to view information required for firewall rules to allow management traffic between the NCC and Nebula devices, such as the port number and protocol type. | |
Data Policy | Use this menu to view NCC legal documents, such as the privacy policy, terms of use and data processing agreement. | |
License Calculator | Use this menu to specify the number of Nebula devices and a time period to determine the license credit (device points) you should get for the NCC service within a specific time frame. |